CHINA INDUSTRIAL COATINGS R&D EXPERT!

Choose GOMIN COATING China Coatings Expert
Home / All / UV Coatings / UV Resins & Raw Materials / GMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood Coatings

GMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood Coatings

GMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood Coatings
GMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood CoatingsGMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood CoatingsGMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood Coatings
Share
CategoriesUV Resins & Raw Materials
BrandGomin Industry Coating Wholesale Manufacturer
Product SpecificationsGMS-3323D
Product CodeGMS-3323D
ChemistryPolyester acrylate
AppearanceThick, transparent liquid
Viscosity at 25 C300-1,000 mPa.s
Solid Content100 %
Acid Value<= 4 mg KOH/g
Functionality3
ApplicationsUV wood white paint; UV wood primer
Packaging20 kg black plastic pail
Shelf Life12 months at 5-35 C, avoid direct sunlight
Detail Information

GOMIN / UV RESINS & RAW MATERIALS

GMS-3323D Low-Odor Polyester Acrylate Resin for UV Wood Coatings

GMS-3323D is a trifunctional, 100%-solids polyester acrylate oligomer (viscosity 300-1,000 mPa.s at 25 C, acid value ≤ 4 mg KOH/g, functionality 3) used in UV-curable wood white topcoats and UV wood primers. The manufacturer describes it as completely odor-free before and after curing, with extremely low cure shrinkage, excellent adhesion, outstanding yellowing resistance and good wetting of pigments and fillers. It is supplied in 20 kg black plastic pails with a 12-month shelf life at 5-35 C.

UV wood coating packaging in a furniture interior, showing a downstream application context for GMS-3323D low-odor polyester acrylate
Application context: UV-curable wood coatings formulated with polyester acrylate raw materials. GMS-3323D is the resin raw material, not the finished coating shown.

GMS-3323D at a glance

Every value below is taken from the manufacturer's Technical Data Sheet (TDS). No performance claim has been added or extrapolated.

3Functionality
100 %Solid content
300-1,000mPa.s at 25 C
≤ 4mg KOH/g acid value
Source: GMS-3323D Technical Data Sheet, Dalian Gomin Special Coating Co., Ltd.
ItemValueWhy it matters to a formulator
ChemistryPolyester acrylateOligomer backbone for UV-curable wood systems
Functionality3Trifunctional grade; confirm cure response in your own formulation
Solid content100 %No solvent content declared in the TDS specification field
Viscosity @ 25 C300-1,000 mPa.sLow viscosity supports leveling and pigment wetting
Acid value≤ 4 mg KOH/gKey incoming-QC parameter for resin acceptance
ApplicationsUV wood white paint; UV wood primerListed application areas in the TDS
Pack / shelf life20 kg pail / 12 months at 5-35 CStandard ordering and warehouse planning data

The TDS does not publish numerical VOC, density, colour, refractive index, glass transition temperature or shrinkage values. Request and verify those parameters separately if they are part of your qualification criteria.

What is GMS-3323D?

GMS-3323D is a polyester acrylate oligomer supplied for UV-curable wood coatings. On the manufacturer's Technical Data Sheet the product name appears as Netting polyester resin (from the Chinese 净味聚酯树脂, literally "low-odor / odor-free polyester resin"), with the product code GMS-3323D. In international sourcing it is commonly looked for as low-odor polyester acrylate, odor-free polyester acrylate, polyester acrylate for UV wood coating and UV white paint resin. All of these refer to this single grade.

Physically it is a thick, transparent liquid. It is a 100%-solids resin with a functionality of 3, a viscosity of 300-1,000 mPa.s at 25 C and an acid value of no more than 4 mg KOH/g. These five values form the basic specification used for incoming quality control and for comparing this grade against other UV oligomers.

What "netting / low-odor" means in practice

The TDS states that the resin is completely odor-free both before and after curing. For a wood-coating producer, that addresses two separate points: the working environment while the coating is being mixed and applied, and the odor of the finished, cured panel or furniture part. It is a manufacturer's descriptive claim: no odor test method, threshold or panel rating is published in the TDS, so verify it on your own cured film under your production conditions.

Is GMS-3323D a zero-VOC resin?

The TDS reports 100% solid content, but it does not publish a VOC measurement or a regulatory declaration. We therefore do not make a zero-VOC, emissions-free or food-contact claim for this product. If your market requires documented VOC compliance, request the full TDS and Safety Data Sheet and confirm against your own formulation and local regulation before approval.

Why do UV wood coating formulators choose GMS-3323D?

White UV wood coatings are among the hardest systems to balance: high pigment loading raises viscosity, shrinkage during cure weakens adhesion on the substrate, and any yellowing is visible immediately. The TDS positions GMS-3323D against exactly these problems.

Feature stated in the TDSFormulation problem it addressesWhere it is most relevant
Completely odor-free before and after curing; excellent adhesionOdor complaints during production and in finished goods; adhesion loss on coated woodWhite topcoats and primers for indoor wood products
Extremely low curing shrinkageAdjusts the brittleness and adhesion of UV white paint and reduces cure shrinkage of the white coatingHigh-build white topcoats where shrinkage stresses cause cracking or adhesion failure
Outstanding yellowing resistanceColour drift in white and light-colour finishesWhite wood furniture, panels and decorative surfaces
Low viscosity, good leveling, good wetting of pigments and fillers, high cost-performancePoor dispersion, orange peel and high viscosity in highly filled white systems; cost controlUV wood white paint and UV wood primer

What does low shrinkage change in a UV white paint?

When a UV coating cures, volume contraction builds internal stress at the coating-substrate interface. The TDS states that the extremely low shrinkage of GMS-3323D can effectively adjust the brittleness and adhesion of UV white paint and reduce the shrinkage rate of the white coating. This is the property to examine first if your current white topcoat shows edge lifting, cracking after cure or adhesion loss after cross-cut testing. The TDS gives no numerical shrinkage figure, so a side-by-side cure trial on your own substrate is the correct way to quantify the improvement.

Why yellowing resistance matters for white systems

Any yellow shift is far more visible on a white finish than on a dark or clear one, and it changes the measured colour of a batch. Because GMS-3323D is described as having outstanding yellowing resistance and is listed for UV wood white paint, it is a candidate for formulations where colour stability of the white film is a release criterion. The TDS does not publish a Delta-b or QUV value, so accelerated-weathering and bake-yellowing data should be generated in your own laboratory.

How low viscosity helps pigment and filler wetting

White coatings carry a high loading of titanium dioxide and fillers. A resin with low viscosity, good leveling and good wetting of pigments and fillers, as stated for GMS-3323D, makes that loading easier to process and helps the wet film level before cure. Combined with a 100%-solids grade, what you add to the mill base stays in the cured film.

Technical specifications of GMS-3323D

The following table is the complete technical parameter set published on the GMS-3323D TDS. Values are given as typical descriptions by the manufacturer and are not a contractual product specification.

ParameterValueTest condition / unit
AppearanceThick, transparent liquidVisual
Viscosity300-1,000mPa.s at 25 C
Solid content100%
Acid value≤ 4mg KOH/g
Functionality3-
Packaging20 kgBlack plastic pail
Shelf life12 months5-35 C, avoid direct sunlight

Values reproduced exactly from the GMS-3323D Technical Data Sheet. No value has been extrapolated, rounded up or supplemented with data from other grades. For lot-specific values, request the current TDS revision.

UV-curable clear coating pail on a wood worktop, illustrating a downstream wood finishing application for polyester acrylate oligomers
Downstream wood-finishing context. The pail shown is a finished coating, not the GMS-3323D resin raw material.

Recommended applications and how to qualify

The TDS lists two application areas for GMS-3323D. We deliberately keep this section narrow: a resin should only be recommended for the uses its own data sheet supports.

UV wood finish white paint (white topcoat)

In a UV-curable white topcoat for wood, GMS-3323D is used for the combination of low cure shrinkage, excellent adhesion, outstanding yellowing resistance and good leveling. The low shrinkage specifically helps adjust brittleness and adhesion, while the pigment and filler wetting supports a heavily loaded white formulation. Typical end uses within this category include white-coated wood furniture, boards and decorative wood panels; these are applications of UV wood white paint, not additional claims about the resin.

UV wood primer

In a UV wood primer, the relevant properties are low viscosity, good leveling, good wetting of pigments and fillers and adhesion. A 100%-solids, low-viscosity oligomer is straightforward to incorporate into a primer mill base and keeps the formulation free of a solvent-reduction step. Confirm the cure window and intercoat adhesion with your own primer/topcoat system.

Range of UV-curable coating products for wood, plastic and metal, illustrating the formulation families that use UV resin raw materials
UV coating product families that rely on oligomers such as GMS-3323D as raw materials.

How to qualify GMS-3323D in your own production line

Because the TDS does not include a starting formulation, dosage, photoinitiator package or cure energy, we do not publish invented numbers here. A sound qualification path is:

  1. Define the target: substrate, coating layer (white topcoat or primer), film build and the property that currently fails, for example adhesion after cross-cut, brittleness or colour drift.
  2. Request documentation: full TDS, Safety Data Sheet and a sample of the current production lot.
  3. Run a side-by-side trial: replace your existing oligomer stepwise, keeping the photoinitiator, pigment loading and cure energy constant so the effect of the resin is measurable.
  4. Measure the criteria that matter: viscosity of the mill base, leveling, cure shrinkage behaviour, adhesion, yellowing and cured-film odor, on your own substrate and lamp setup.
  5. Scale-up review: confirm packaging, shelf life, storage conditions and incoming-QC limits (viscosity at 25 C, acid value ≤ 4 mg KOH/g) before a production order.

Any added level, cure speed, lamp energy or compatibility statement must come from your trial or from a written formulation recommendation, not from this page.

Packaging, storage and shelf life

ItemTDS value
Standard packaging20 kg / black plastic pail
Shelf life12 months
Storage temperatureRoom temperature, 5-35 C
Storage conditionAvoid direct sunlight

Store the resin in its original closed pail within the stated temperature range and keep it out of direct sunlight. Minimum order quantity, palletisation, lead time, Incoterms and shipping classification are confirmed per inquiry because they depend on destination and order size; they are not fixed values in the TDS.

Documentation, samples and technical support

B2B buyers rarely approve a raw material from a web page alone. These are the items you can request before placing a production order:

  • Full Technical Data Sheet (PDF): the source document for every number on this page.
  • Safety Data Sheet (SDS): for handling, storage, transport and EHS review.
  • Sample of the current production lot: for laboratory qualification on your substrate.
  • Lot-specific data and incoming-QC limits: viscosity at 25 C, acid value and appearance.
  • Commercial terms: quotation, MOQ, lead time and delivery terms for your destination.

Our technical team can review your current white topcoat or primer problem, whether shrinkage, brittleness, adhesion, leveling or yellowing, and tell you whether a trial with GMS-3323D is worth running. We do not publish formulation dosages without knowing your system.

Frequently asked questions about GMS-3323D

What is GMS-3323D used for?

According to the manufacturer's Technical Data Sheet, GMS-3323D is used in UV-curable wood white topcoats (UV wood finish white paint) and UV wood primers. No other applications are listed in the TDS; suitability for other substrates or coating systems must be validated in your own trials.

Is GMS-3323D really odor-free after curing?

The Technical Data Sheet describes the resin as completely odor-free both before and after curing. This is the manufacturer's product description; no odor test method or numerical odor rating is published in the TDS. We recommend confirming it on your own cured film.

What is the viscosity and solid content of GMS-3323D?

Viscosity is 300-1,000 mPa.s measured at 25 C, and solid content is 100 %. Acid value is no more than 4 mg KOH/g and functionality is 3.

How does GMS-3323D help UV white coatings?

The TDS states that its extremely low curing shrinkage adjusts the brittleness and adhesion of UV white paint and reduces the cure shrinkage of the white coating. It also combines low viscosity, good leveling, good wetting of pigments and fillers, and outstanding yellowing resistance, all relevant to highly filled white systems.

Is "Netting polyester resin" the same product as GMS-3323D?

Yes. "Netting polyester resin" is the English product name printed on the GMS-3323D Technical Data Sheet for the Chinese name 净味聚酯树脂 (literally, low-odor / odor-free polyester resin). Buyers searching for low-odor polyester acrylate, odor-free polyester acrylate or Netting polyester resin are referring to the same GMS-3323D grade.

What is the shelf life and how should GMS-3323D be stored?

Shelf life is 12 months when stored at room temperature of 5-35 C and protected from direct sunlight. Keep the pail closed and follow the site handling rules in the Safety Data Sheet.

What packaging is GMS-3323D supplied in?

The standard packing listed in the TDS is a 20 kg black plastic pail. Minimum order quantity, palletisation and lead time are confirmed per inquiry.

Does the TDS publish VOC, density or a numerical shrinkage value?

No. The TDS publishes appearance, viscosity at 25 C, solid content, acid value and functionality, but gives no numerical VOC, density, colour, refractive index or shrinkage value. Shrinkage is described qualitatively as "extremely low". Request the full TDS and SDS, and measure these properties in your own laboratory if they are qualification criteria.

Is GMS-3323D suitable for UV wood primer as well as white topcoat?

Yes. Both UV wood finish white paint and UV wood primer are listed as application areas in the TDS. In primers, the low viscosity, leveling and pigment/filler wetting are the relevant properties; in white topcoats, low shrinkage and yellowing resistance are additionally relevant.

Can I request a sample, the full TDS or a quotation?

Yes. Email mesco@mescogroup.com.cn or call +86-411-87317868 with your substrate, coating layer, current resin system, curing equipment, target properties and estimated monthly volume. Our technical team will reply with sample availability, documentation and a quotation.

Request a quote, a sample or the full TDS

Tell us what you are formulating and what is failing in the current system. The more precise the brief, the faster our technical team can confirm whether GMS-3323D is the right oligomer for your line and send the relevant documentation instead of a generic brochure.

Include these six points in your inquiry:

  1. Substrate and end product, for example white-coated wood furniture or wood panels
  2. Coating layer: UV white topcoat or UV wood primer
  3. Current resin system and the problem to solve: shrinkage, brittleness, adhesion, leveling, yellowing or odor
  4. Curing equipment: lamp type and line setup
  5. Target properties and your test methods
  6. Estimated monthly volume, delivery country or port, and required documents (TDS, SDS, sample)
FactoryNo. 5 Liaohe Middle 2nd Road, Dalian Economic and Technological Development Zone, Liaoning, China

Data source and disclaimer

All technical values and product descriptions on this page are taken from the GMS-3323D Technical Data Sheet issued by Dalian Gomin Special Coating Co., Ltd. The information in that document is stated to be accurate and reliable, but the conditions of use are outside the manufacturer's supervision. The manufacturer accepts no legal responsibility for recommended parameters, states that the data are a general description and not a product specification, and gives no guarantee because its products are applied onto other products and used together with them. Buyers must validate suitability in their own formulations. Content source reviewed 19 November 2026.

Review
  • 加载中···
Please send your message to us
*Email
Name
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Choose GOMIN COATING China Coatings Expert
Contact Person
Max Wang
Full Name:
Max Wang
Tel:

+86 15134565556

Email:
mesco@mescogroup.com.cn
WhatsApp:
8615134565556
Please send your message to us
*Email
Name
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.