Power Degreaser | GOMIN

GOMIN Power Degreaser, also known by its Chinese name Qiangli Huayouji (强力化油剂), is a high-alkalinity water-based cleaning concentrate designed to rapidly emulsify and saponify oil-based industrial and commercial contamination. It is formulated to remove cooking oil, carbon coke deposits, machine oil, food-origin residues, engine grease, and general industrial oil soiling. The formula converts grease into water through a chemical emulsification process, enabling easy rinsing and leaving surfaces clean without heavy scrubbing.

Yes. GOMIN Power Degreaser contains no alkylphenol ethoxylates (APEO), no phosphates, and no nitrites — the persistent pollutants commonly found in legacy kitchen degreasers. The formula is fully biodegradable and odourless. It is suitable for use on commercial kitchen range hoods, stovetops, and floor surfaces. After cleaning, surfaces should be thoroughly rinsed with clean water before returning to food service use. The product is not intended for direct food contact surface sterilisation.

The two products are complementary but distinct. The Heavy-Oil Degreaser (pH 11–13) is optimised specifically for removing huang pao (yellow gummy polymerised machine scale) from metal components and machine tools, and is safe for aluminium alloys. The Power Degreaser (pH 12–14) has higher alkalinity and is optimised for a broader range of oil contamination types including cooking oil, carbon coke, food residues, and general machine oil — making it the preferred choice for commercial kitchens, canteens, and mixed-use industrial facilities. For non-ferrous surfaces, the Heavy-Oil Degreaser is the safer choice.

For heavily soiled commercial range hoods with baked-on carbon coke and oil build-up, apply the product undiluted or at a 1:10 dilution with water. Spray or wipe onto the soiled surface, allow 2–5 minutes dwell, then scrub with a brush and rinse thoroughly. For routine maintenance cleaning of moderately soiled hoods, a 1:30 dilution is typically sufficient. Heating the solution to 40–60°C will significantly accelerate the breakdown of baked-on carbon deposits.

GOMIN Power Degreaser can be used for degreasing motors, generators, and general mechanical equipment, but it is not a rated dielectric cleaner. For live electrical equipment or precision electronic components, use the GOMIN Electromechanical Equipment Cleaner, which carries a 25 KV dielectric rating and is designed for use on energised equipment. For motors that have been powered down, apply the Power Degreaser, allow dwell time, brush or scrub, then flush with water and dry thoroughly before reconnection. Re-lubricate moving parts after cleaning.

Waste cleaning solution from GOMIN Power Degreaser is strongly alkaline. It should be neutralised with an appropriate acid (targeting pH 6–9) before discharge into the municipal sewage treatment system. The formula contains no persistent pollutants, APEO, phosphates, or nitrites, so once neutralised, it passes through standard biological treatment without special handling. Do not discharge directly into natural waterways, storm drains, or surface water without prior neutralisation and appropriate approvals.