Fluorosilicone-modified acrylate
It is a 100% solid content hexafunctional fluorosilicone-modified specialty acrylate. This resin offers excellent stain resistance, high-temperature resistance, boiling water resistance, steel wool resistance, and good leveling.
Product Characteristics
Through graft modification, the fluorosilicon segments can be anchored in the cross-linked network, ensuring long-lasting and stable stain resistance.
Application Recommendations: 3D printing, UV adhesive, UV coatings.
Suitable for Coating: Metal, glass, plastics (such as PC, ABS, PET), ceramics, etc.
Performance Parameters
Item | Advantages and Potential Benefits |
High-Temperature Resistance | Excellent |
Curing Speed | Fast |
Wear Resistance | Excellent |
Toughness | Good |
Water Resistance | Excellent |
Leveling Property | Excellent |
Compatibility with Other Resins | Good compatibility with most acrylate resins |
Viscosity (mPa·s @ 25°C) | 700-3200 |
Appearance | Colorless or light yellow transparent liquid |
Color Value (APHA) | <50 |
Functionality | 6 |
Application Instructions
▊ Application Guidelines
Item | Parameter Requirements |
Mixing Time | 10-15 minutes (low-speed mixing to avoid bubble formation) |
Application Temperature | 15-30°C (preheat resin to 25°C if ambient temperature is below 10°C) |
Diluent | No solvent addition required |
Filtration | Recommended to use a 200-mesh filter |
Coating Method | Blade coating, spray coating, dip coating (recommended film thickness: 10-50μm) |
UV Curing Conditions | Wavelength 365nm, light intensity 80-120mW/cm², exposure 3-10s (adjust based on film thickness) |
▊ Surface Preparation
The substrate must be clean, dry, and free from oil and dust. For metal surfaces, sandblasting (Sa 2.5, roughness 20-40μm) or chemical pretreatment (such as phosphating or passivation) is recommended. For plastic surfaces, corona treatment (dyne level ≥38mN/m) or flame treatment is required to enhance adhesion.
▊ Application Parameters
Dry Film Thickness | Theoretical Usage (g/m²) | Coverage Area (m²/kg) |
20μm | 24 | 41.7 |
50μm | 60 | 16.7 |
▊ Drying Time
Temperature | Full Cure | Full Cure Time |
UV Curing (Standard) | 3-5s | 24h (post-cure at room temperature) |
▊ Storage and Packaging
Item | Requirements |
Storage Conditions | Store in a cool, dry place (5-30°C), away from light and sealed. Avoid high temperatures or freezing. Shelf life: 6 months. |
Packaging Specifications | 25kg/drum (galvanized iron drum or HDPE drum) |
▊ Precautions
(1) This product requires curing under UV light. Operators must wear UV-protective goggles and gloves.
(2) Avoid skin contact with uncured resin. In case of accidental contact, wash immediately with soapy water. Do not use solvents to wipe.
(3) Maintain a clean working environment to prevent dust from affecting the coating appearance.
(4) Dispose of waste resin according to local environmental regulations. Direct discharge is prohibited.
Quality Inspection and Assurance
To ensure consistent product quality, it is essential to refer to the quality assurance and inspection plan of Gomin CO., LTD. It is recommended to use an inspection-qualified control unit.
